Product ID:SPEEDHIDE EXT LATEX H/P PASTEL BASE, (SUPP
MSDS Date:04/04/1991
FSC:8010
NIIN:00N025489
MSDS Number: BMCMY

PPG INDUSTRIES INC (WAS PTTTSBURGH PLATE GLASS CO)

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 800-245-2590;412-492-5555

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

NOT EXPECTED TO GENERATE EXCESSIVE AMT OF RESPIRABLE

RTECS: 9999999ZZ

SENSATION & VISUAL DISTURB MAY INDICATE EXCESS EYE

RTECS: 9999999ZZ

ASSOCIATED WITH EXCESSIVE SKIN CONTACT.

RTECS: 9999999ZZ

& TO REMOVE DECOMPOSITION PROD DURING WELDING/FLAME

RTECS: 9999999ZZ

NEOPRENE OR LATEX GLOVES.

RTECS: 9999999ZZ

DISABLING INJURY KNOWN AS SILICOSOS. EFTS ARE ASSOC

RTECS: 9999999ZZ

SILICA, CRYSTALLINE - FUSED

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 2-5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

DIATOMACEOUS EARTH, NATURAL; (SILICA,

CAS: 61790-53-2

RTECS: HL8600000

Fraction By Weight: 5-10%

OSHA PEL 20 MPPCF

ACGIH TLV: 10 MG/M3 TDUST; 9293

ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 2-5%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 20-25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 40-45%

ETHYLENE GLYCOL

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1-2%

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM,VAPOR, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

PROPIONIC ACID,2-METHYL-,MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 15-20%

SILICA, CRYSTALLINE - CRISTOBALITE

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: 2-5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 2-5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

ZINC COMPOUNDS

Fraction By Weight: 2-5%

ETHYLENE GLYCOL WHICH MAY CAUSE KIDNEY & LIVER

RTECS: 9999999ZZ

LAB ANIMALS. NO EVIDENCE OF THESE EFTS HAS BEEN

RTECS: 9999999ZZ

IARC ASSOC W/AN INCR RISK OF CANCER IN LAB ANIMALS.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL IF
SWALLOWED. EYE:CAUSES IRRIT. SKIN:MAY CAUSE SLIGHT IRRIT. INHAL:VAP
& SPRAY MISTS MAY BE HARMFUL IF INHALED. VAP GENERATED @ ELEVATED
TEMP IRRITATES EYES/NOSE/THROAT. SAN D/GRIND DUSTS MAY BE HARMFUL
IF INHALED. CHRONIC:AVOID LONG-TERM & RPTD CONT. PROD CNTNS
TITANIUM (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA: GROUP 2A
(IARC);GROUP 2 (NTP).
Effects of Overexposure:HLTH HAZ:DIOXIDE. ANIMALS INHALING MASSIVE QTY
OF TITANIUM DIOXIDE DUST IN LONG-TERM STUDY DEVELOPED LUNG TUMORS.
STUDIES W/HUMANS INVOLVED IN MFR OF PIGMENT INDICATE NO INCR RISK
OF CANCER FROM EXPOS . POTNTL FOR INHAL OF TITANIUM DIOXIDE DUSTS
FROM COAT IS VERY LIM. SINCE OVEREXPS ARE NOT EXPECTED, THERE
IS(SUPP DATA)

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF H*2O
FOR @ LST 15 MIN. SKIN:REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & H*2O. INHAL:REMOVE TO FRESH AIR.
APPLY ARTF R ESP & OTHER SUPPORTIVE MEASURES AS REQD. IF ANY OF
FOLLOW USE OF PROD, CONT POIS CTRL CTR, EMER ROOM/PHYS IMMED; HAVE
MATL SFTY DATA SHEET INFO AVAIL.

Flash Point Method:PMCC
Extinguishing Media:USE NATL FIRE PROT ASSOC (NFPA) CLASS B EXTING
(CO*2/DRY CHEM/UNIVERSAL AQUEOUS FILM FORM) DESIGNED TO EXTING(SUPP
DATA)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H*2O
SPRAY MAY BE INEFT. H*2O SPRAY MAY BE USED TO COOL CLSD CONTR TO
PVNT PRESS BUILDUP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILDUP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP AND SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST/VERMICULITE/OTHER
ABSORB MATL & PLACE IN TO CONTR FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTY
IN BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS IIIB
COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF MATERIAL IS PART OF MULTIPLE COMPONENT COATING
SYSTEM, READ MATERIAL SAFETY DATA SHEET(S) FOR OTHER COMPONENT OR
COMPONENTS BEFORE BLENDING AS RESULTING MIXTURE MAY HAVE HAZARDS OF
ALL ITS PARTS.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE NIOSH/MSHA
APPROVED SUITABLE RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC OF INGRED BELOW LOWEST SUGGSTED EXPOS LIM, (ING 19)
Protective Gloves:IMPERMEABLE GLOVES: NITRILE, (ING 20)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLEAN/DISCARD CONTAMD CLTHG AND SHOES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR TRADE NAME/PART NO:6-650 (063089V). EXTING MEDIA:NFPA CLASS IIIB
COMBUST LIQ FIRES. FIRE FIGHT PROC:AUTOIGNIT/EXPLOS WHEN EXPOS TO
EXTREME HEAT. IF H*2O IS USED, FOG NOZZLES ARE PREF. HAZ DECOMP:Z
INC OXIDE, HYDROGEN CHLORIDE, CHLORINATED PROD, CHLORINE. EFTS OF
OVEREXP:NO SIGNIFICANT HAZ FOR MAN. PROD CNTNS(ING 12)

HCC:N1
Boiling Pt:B.P. Text:100F,38C
Vapor Pres:17.2
Vapor Density:HVR/AIR
Spec Gravity:1.40
Evaporation Rate & Reference:33(BUAC=1)
Solubility in Water:45.3%
Appearance and Odor:VISCOUS LIQ W/AN ODOR CHARACTERISTIC OF CHEMICAL &
ANY SOLV LISTED IN INGREDS.
Percent Volatiles by Volume:82.10

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH ALKALIES, STRONG MINERAL ACIDS, OR OTHER STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PROD WHEN HEATED.
WELD/BRAZ/FLAME-CUTTING ON SURF COATED W/PROD MAY PRDCE FUMES
INCL:CO (SUPP DATA)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.